石墨烯纳米网电导特性的能带机理：第一原理计算

通过第一原理电子结构计算来研究有序多孔纳米网的电导特性变化的能带机理.能带结构分析结果表明:石墨烯纳米网超晶格(3m,3n)(m和n为整数)的电子本征态在布里渊区中心点发生四重简并;碳空位孔洞规则排列形成的石墨烯纳米网具有由简并态分裂形成的宽度可调带隙,无论石墨烯的两个子晶格是否对等.在具有磁性网孔阵列的石墨烯纳米网中,反铁磁耦合使对称子晶格的反演对称性增加了一项量子限制条件,导致能带结构在K点的二重简并态分裂成带隙.通过控制网孔密度能够有效调节石墨烯纳米网的带隙宽度,为实现新一代石墨烯纳米电子器件提供了理论依据.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

Dynamic and buckling analysis of polymer hybrid composite beam with variable thickness

This work deals with a study of the dynamic and buckling analysis of polymer hybrid composite(PHC) beam. The beam has variable thickness and is reinforced by carbon nanotubes(CNTs) and nanoclay(NC) simultaneously. The governing equations are derived based on the first shear deformation theory(FSDT). A three-phase HalpinTsai approach is used to predict the mechanical properties of the PHC. We focus our attention on the effect of the simultaneous addition of NC and CNT on the vibration and buckling analysis of the PHC beam with variable thickness. Also a comparison study is done on the sensation of three impressive parameters including CNT, NC weight fractions, and the shape factor of fillers on the mechanical properties of PHC beams,as well as fundamental frequencies of free vibrations and critical buckling load. The results show that the increase of shape factor value, NC, and CNT weight fractions leads to considerable reinforcement in mechanical properties as well as increase of the dimensionless fundamental frequency and buckling load. The variation of CNT weight fraction on elastic modulus is more sensitive rather than shear modulus but the effect of NC weight fraction on elastic and shear moduli is fairly the same. The shape factor values more than the medium level do not affect the mechanical properties.     

Syntheses and structures of two novel fluorescent metal–organic frameworks generated from a tridentate donor–acceptor motif ligand

The tridentate organic ligand 4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoic acid ( H₃L ) has been synthesized (as the methanol 1.25‐solvate, C₄₈H₃₉NO₆·1.25CH₃OH). As a donor–acceptor motif molecule, H₃L possess strong intramolecular charge transfer (ICT) fluorescence. Through hydrogen bonds, H₃L molecules construct a two‐dimensional (2D) network, which pack together into three‐dimensional (3D) networks with an ABC stacking pattern in the crystalline state. Based on H₃L and M(NO₃)₂ salts (M = Cd and Zn) under solvothermal conditions, two metal–organic frameworks (MOFs), namely, catena‐poly[[triaquacadmium(II)]‐μ‐10‐(4‐carboxyphenyl)‐4,4′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6‐diyl)dibenzoato], [Cd(C₄₈H₃₇NO₆)(H₂O)₃]_n, I , and poly[[μ₃‐4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoato](μ₃‐hydroxido)zinc(II)], [Zn₂(C₄₈H₃₆NO₆)(OH)]_n, II , were synthesized. Single‐crystal analysis revealed that both MOFs adopt a 3D structure. In I , partly deprotonated HL ^2? behaves as a bidentate ligand to link a Cd^II ion to form a one‐dimensional chain. In the solid state of I , the existence of weak interactions, such as O—H…O hydrogen bonds and π–π interactions, plays an essential role in aligning 2D nets and 3D networks with AB packing patterns for I . The deprotonated ligand L ^3? in II is utilized as a tridentate building block to bind Zn^II ions to construct 3D networks, where unusual Zn₄O₁₄ clusters act as connection nodes. As a donor–acceptor molecule, H₃L exhibits fluorescence with a photoluminescence quantum yield (PLQY) of 70% in the solid state. In comparison, the PL of both MOFs is red‐shifted with even higher PLQYs of 79 and 85% for I and II , respectively.     

A solvent-governed surface state strategy for rational synthesis of N and S co-doped carbon dots with multicolour fluorescence

ABSTRACT

Multicolour emissive carbon dots (CDs) are widely investigated by virtue of their merits on fluorescent properties. Method on heteroatom doping assisted with various solvents has been proved efficient in achieving multiple-colour-emissive CDs, especially long-wavelength emission. Herein, a synthesis of multicolour-emissive CDs by controlled surface function is reported. By tuning the thermal-pyrolysis temperature and molar ratio of reactants, optimal emission of the resulted CDs gradually shifts from blue to yellow light with the assistance of different solvents. According to the emissive relationship dependent on excitation, fluorescence lifetimes, and FT-IR of these CDs, the different surface states participated with S and N elements on the surface of carbogenic core govern fluorescent colours of the CDs. In terms of the applications, blue CDs (B-CDs) exhibits high sensitivity for ion detections of Ag⁺ and Fe³⁺, which is further illustrated to have different quenching mechanisms each other because that these ions have the affinity interaction with different surface groups of the CDs. Moreover, blue and yellow CDs solutions are mixed with PVP water solution to fabricate white-light CDs/PVP film, which exhibits stable fluorescence with a CIE coordinate of (0.32, 0.33) and endows these CDs as potentially fluorescent nanomaterial in the solid state lighting field.     

Eu-doped ZnO nanoparticles: Sonochemical synthesis,characterization, and sonocatalytic application

Undoped and europium (III)-doped ZnO nanoparticles were prepared by a sonochemical method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. The crystalline sizes of undoped and 3% Eu-doped ZnO were found to be 16.04 and 8.22 nm, respectively. The particle size of Eu-doped ZnO nanoparticles was much smaller than that of pure ZnO. The synthesized nanocatalysts were used for the sonocatalytic degradation of Acid Red 17. Among the Eu-doped ZnO catalysts, 3% Eu-doped ZnO nanoparticles showed the highest sonocatalytic activity. The effects of various parameters such as catalyst loading, initial dye concentration, pH, ultrasonic power, the effect of oxidizing agents, and the presence of anions were investigated. The produced intermediates of the sonocatalytic process were monitored by GC–Mass (GC–MS) spectrometry.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

Ultrasound-assisted immersion freezing reduces the structure and gel property deterioration of myofibrillar protein from chicken breast

The effects of air freezing (AF), immersion freezing (IF) and ultrasound-assisted immersion freezing (UF) at different power levels (125, 165, 205 and 245 W) on the structure and gel properties of the myofibrillar protein (MP) of chicken breast were investigated. UF at 165 W (UF-165) had no obvious negative impact on the primary structure of the MP and effectively reduced the change in the secondary and tertiary structure. In addition, UF-165 significantly reduced the losses in the elastic modulus (G′), gel strength, and gel water holding capacity (P < 0.05). According to low field nuclear magnetic resonance analysis, the T₂₁ and T₂₂ of the UF-165 MP gels were shorter than those of the AF and IF samples, which meant that the UF-165 reduced the mobility of the immobilized water and free water in MP gel. A scanning electron microscopy analysis showed that the appropriate ultrasonic power promoted the formation of a compact and homogeneous protein gel network. These results suggested that the appropriate ultrasonic power maintained the MP structure and reduced the loss of gel quality.     

新型非对称二苯并[b,f][1,5]二氮杂环辛四烯的合成

以两种不同取代的2-氨基二苯甲酮为原料,氯苯为溶剂,BF3-Et2O为脱水剂,通过分子间脱水一步环化缩合制备非对称二苯并[b,f][1,5]二氮杂环辛四烯衍生物。运用HPLC监控反应过程,优化合成工艺,得到最佳反应条件为:等物质的量的两种不同取代2-氨基二苯甲酮和BF3-Et2O,在氯苯中回流反应12 h。化合物4a^4c为新化合物,其结构经1H NMR,13C NMR和MS(ESI)表征。